Original price was: £395.00.£355.50Current price is: £355.50.
The Advanced Overlands Hybrid water heater offers three convenient heating options: 12V DC, 240V AC, or integration with your diesel heater—ideal for campervans or marine hot water systems year-round.
The 200W 12V element can run off your leisure battery and solar setup, making it perfect for off-grid use.
When connected to mains power, the 240V AC element delivers 1500W of heating power, making it a great option for campsites and marinas or most commonly from an inverter which are available here
The new designed internal tank now has a pass through to allow heating via 75mm ducting, No extra heat exchanger or extra waterpipes/joints needed unlike other systems.
The Advanced Overlands hot water system heats water up to 75°C with the use of a mixer outlet is perfect in your motorhome or narrowboat.
The 10L insulated and pressurised tank connects easily to your existing water supply, featuring built-in tank connectors and requiring minimal power to maintain temperature. It’s compatible with all water pumps up to 45 PSI and includes ½” male BSP fittings, suitable for all standard plumbing connections. If you plan to use a pump with higher pressure than 45 PSI, please contact us for advice.
Don’t have a fresh water pump yet? Check out our 12V pump and accumulator kit—designed to work seamlessly with this system and available for purchase here.
Key features:
Dial controller for switching DC heating on or off and set temp, DC can be wired to a A30 voltage controller.
when 230v power is suppled the AC element is switched on and overrides DC, this AC control has a preset temp to 65c
To run predominantly from solar we would recommend installing at least 300 watts.
10litre heaters
Length not included fittings 39cm
42cm at end of thread
Width 31.8cm
Height 32.8cm
This system is supplied with bare wires and recommend to install via fuses and switchs for both 12v and 230v, recommend diesel heater spacing 1meter away or to be used Tee'd off main ducting.
This product is CE marked, indicating compliance with European health, safety, and environmental protection standards.
Please note Heater can not be mounted upside down/feet at the top.
Require fitting? see our services.
| Weight | 7.4 kg |
|---|---|
| Reducer kit | 75mm |